Interactive demonstration · Projectile motion

Ski Jumper

Set takeoff speed, angle and height, choose the planet and the landing hill, and launch. Watch the horizontal and vertical motions separate. Then switch on air resistance to see where the simple model breaks down.

Used in Week 5 (projectiles)Landing impact links to Week 7Exports CSV

Takeoff

Environment

Playback & challenge

Graphs

Jump log

The physics

vₓ = v₀ cos θ ; v_y0 = v₀ sin θResolve takeoff velocity (Week 1)
x = vₓ·tNo drag: horizontal velocity is constant, so the 0.1 s markers are evenly spaced in x
y = h₀ + v_y0·t − ½g·t²Vertical position, a parabola in time
t_flight = (v_y0 + √(v_y0² + 2g·h₀)) / gFlat ground landing (from the quadratic formula)
h_max = h₀ + v_y0² / 2gPeak height above the takeoff snow, where v_y = 0 (h₀ = lip height)
F_drag = ½ ρ CdA v²Air resistance opposes velocity (ρ = 1.1 kg/m³ for a mountain venue). It is solved numerically (RK4, Δt = 1 ms)
EFH = v⊥² / 2gEquivalent fall height: the drop from rest that would hit with the same speed perpendicular to the landing surface. It is a standard way to rate landing severity in ski-jump design
Why ski jumps are built on a slopeTo fly 19 m over flat ground at 15 m/s, a jumper must fall about 11.5 m. Nearly all of the landing velocity then points into the snow: EFH ≈ 12 m, a dangerous impact. On a 30° landing hill the same 19 m flight meets the snow at a shallow angle, so only the small component of velocity into the surface must be stopped: EFH ≈ 1.7 m. Total speed is the same; what changes is the direction relative to the surface. So the hill shrinks the impulse the legs must absorb (Week 7). Try it in "Try this" #4.

Model limits: point mass; no aerodynamic lift (real V-style jumpers generate substantial lift, so they fly farther than this drag-only model predicts); no wind; ground profile simplified to a straight hill and a flat outrun.

Try this

1 · Best angle depends on height

With flat ground and no drag, press Find best angle at h₀ = 0 m, then 3 m, then 20 m. Why does the optimal angle drop below 45° as takeoff height increases? (Week 5)

2 · Independence of components

Turn on 0.1 s markers. Are they evenly spaced horizontally? Now turn on air resistance and look again. What does that tell you about the horizontal force in each case?

3 · Gravity changes time, not vx

Launch on Earth, then on the Moon, with identical settings. Compare vx, flight time and distance. Which changed and which didn't, and why?

4 · Landing safety

Set v₀ = 15 m/s, θ = −10°, lip 0.5 m, hill slope 30°, drop 40 m. Launch and note distance and EFH. Then set the slope to 0° (flat) and raise the lip height until the jumper flies the same distance (≈ 11.5 m). Compare EFH. Use impulse–momentum to explain what the landing muscles must do in each case. (Week 7)