Week 1 · Foundations

Biomechanics Install: Vectors, Scalars & Trigonometry

Before we can analyze a jump, a sprint, or a throw, we need the math that describes them. This week "installs" the tools you will run every week for the rest of the semester.

Pre-lab ≈ 25 minIn-lab 90 minReport ≈ 90 minTools: calculator, tape measure, Excel

Overview

Biomechanics depends on foundational math, not advanced calculus. Quantities like velocity, acceleration, force and torque are vectors (magnitude and direction); quantities like time, mass and distance are scalars (magnitude only). Trigonometry lets us break vectors into horizontal and vertical pieces and put them back together. This lab is a reset and a rebuild: practice, not perfection.

Learning objectives

  1. Classify biomechanical quantities as vectors or scalars and state their SI units.
  2. Resolve a vector into x- and y-components using sine and cosine.
  3. Compute the magnitude and direction of a vector from its components, correcting the angle for the quadrant.
  4. Add two or more vectors graphically (tip-to-tail) and analytically (component method).
  5. Build an Excel sheet that performs these calculations with COS, SIN, RADIANS, DEGREES and ATAN2.
ComponentWhat you doTime
Pre-labRead background, try the vector tool, complete quiz + 2 short responses20–30 min
Lab activityGuided problems, then the "Vector Walk" — measure real displacement vectors on the floor and test your math90 min
Lab reportExcel vector calculator, vector-walk error analysis, plots, discussion questions≈ 90 min

Pre-Lab Reading ≈ 15 min

1. Scalars versus vectors

A scalar is fully described by a number and a unit: 72 kg, 0.45 s, 20 m. A vector also needs a direction: 6 m/s forward and up at 30°, 850 N straight up. Two sprinters can run the same distance (scalar) while having very different displacements (vector) if one runs a curve. In this course, if a quantity can "point" somewhere, treat it as a vector.

Scalar (magnitude only)SI unitVector (magnitude + direction)SI unit
MasskgDisplacementm
TimesVelocitym/s
Distance, speedm, m/sAccelerationm/s²
Work, energyJForce (incl. weight, GRF)N
PowerWTorque, momentum, impulseN·m, kg·m/s, N·s

2. Right-triangle trigonometry (SOH-CAH-TOA)

Any vector drawn on an x–y grid forms a right triangle with its components. The vector is the hypotenuse (r), the horizontal piece is adjacent to the angle, and the vertical piece is opposite it.

x = r · cos θHorizontal (x) component
y = r · sin θVertical (y) component
r = √(x² + y²)Magnitude (Pythagorean theorem)
θ = tan⁻¹(y / x)Direction — then correct for quadrant
rad = deg / 57.31 radian ≈ 57.3°; 180° = π rad

3. Angle convention and the quadrant problem

In this course angles are measured counter-clockwise (CCW) from the positive x-axis (the "right horizontal"), so they run 0–360°. Sine and cosine handle this automatically: cos 240° is negative, so the x-component comes out negative without any extra thought.

The inverse tangent is the trap. Your calculator's tan⁻¹ only returns angles between −90° and +90°, so it cannot tell (−4, 12) from (4, −12). Always sketch the vector first, then correct:

QuadrantSigns (x, y)Correction to calculator tan⁻¹(|y|/|x|) = φ
I(+, +)θ = φ
II(−, +)θ = 180° − φ
III(−, −)θ = 180° + φ
IV(+, −)θ = 360° − φ

4. Adding vectors

Graphically: draw vector A, then draw B starting at A's tip ("tip-to-tail"). The resultant R runs from the start of A to the tip of B. Analytically: resolve every vector into components, add all the x's (ΣX) and all the y's (ΣY), then rebuild R from ΣX and ΣY. The analytic method is what Excel does and what every motion-analysis program does under the hood.

Worked example — Lab 1 Problem 6 A = 50 N at 27°, B = 70 N at 145°.
Aₓ = 50 cos 27° = 44.55 N, A_y = 50 sin 27° = 22.70 N
Bₓ = 70 cos 145° = −57.34 N, B_y = 70 sin 145° = 40.15 N
ΣX = −12.79 N, ΣY = 62.85 N → |R| = √(12.79² + 62.85²) = 64.1 N
φ = tan⁻¹(62.85/12.79) = 78.5°; the resultant is in Quadrant II, so θ = 180° − 78.5° = 101.5°.

5. Doing it in Excel

Excel's trig functions work in radians. This is the single most common mistake students make all semester.

=B2*COS(RADIANS(C2))x-component of magnitude B2 at angle C2 (degrees)
=B2*SIN(RADIANS(C2))y-component
=SQRT(D2^2+E2^2)Magnitude from components
=MOD(DEGREES(ATAN2(D2,E2)),360)Direction 0–360°, quadrant handled automatically. Note: Excel's ATAN2 takes (x, y) — x first.

Interactive: Vector addition explorer

Enter the Lab 1 problems and check your hand calculations. Change one angle at a time and watch which components change sign.

Why this matters in biomechanics

A ground reaction force during a sprint start pushes up and forward; only its horizontal component accelerates the athlete down the track. A volleyball leaves the hand at an angle; its vertical component sets the hang time, its horizontal component sets the distance. Every week from here on uses these tools.

Optional: see distance vs. displacement in motionLoad Week 1 Vector Walk – Course 2 in the Field Runner demo. Before pressing Start, predict the displacement it will report.

Before you come to lab

  • Bring a scientific calculator and know how to switch it between DEG and RAD.
  • Bring a laptop with Excel (or Google Sheets) installed and signed in.
  • Complete the pre-lab quiz and short responses below.

Pre-Lab Quiz ≈ 10 min

Answer each question, then click Check my answers. Record your score and download your short responses for your course LMS.

Which of the following is a vector quantity?
A force has both size and direction. Mass, time and distance have size only.
A force of 350 N acts at 70°. Its horizontal (x) component is closest to:
x = 350 cos 70° = 119.7 N. 328.9 N is the y-component (350 sin 70°).
A velocity vector is 6 m/s at 240°. What are the signs of its components?
240° lies in Quadrant III (between 180° and 270°), so both components are negative: x = −3.00, y = −5.20 m/s.
Vx = −4 m/s and Vy = 12 m/s. Your calculator gives tan⁻¹(12/−4) = −71.6°. What is the correct direction (CCW from +x)?
(−, +) is Quadrant II. Using φ = 71.6°, θ = 180° − 71.6° = 108.4°.
In Excel, cell B2 holds 50 and C2 holds 27 (degrees). Which formula correctly returns the y-component?
Excel trig functions expect radians, so convert first; the y-component uses sine.
When adding vectors with the component method, you:
Magnitudes only add directly when vectors point the same way. Components always add.
Two equal 100 N forces act at 0° and 180°. The resultant is:
ΣX = 100 + (−100) = 0 and ΣY = 0, so R = 0. Equal and opposite forces cancel.
A sprinter's horizontal GRF component accelerates her forward. Which change increases that component the most, if total GRF stays the same?
x = F cos θ. A lower angle (smaller θ) makes cos θ larger, so more of the same force is horizontal — this is why sprinters lean forward at the start.

Short responses (submit to your LMS)

1. In your own words, explain why the inverse tangent function alone can give the wrong direction for a vector. Use the vector (−5 m/s², −9 m/s²) as your example.

2. Name one movement from your own sport or exercise experience and identify one vector and one scalar that describe it. Why does the direction of the vector matter for performance?

Lab Activity 90 min

Group organization

20 students → 4 teams of 5. Roles rotate at each vector-walk trial: Walker, Navigator (protractor/compass), Measurer, Recorder, Checker (does the math live).

Equipment per team

  • 30 m tape measure, painter's tape, 4 cones
  • Large protractor or phone compass app
  • Calculator; laptop with Excel
  • Printed or digital problem set

Timeline

  • 0:00–0:10Welcome, lab expectations, team formation, quick check of calculator DEG/RAD mode.
  • 0:10–0:35Part A — Guided problem set. Instructor works the first problem of each pair on the board; teams complete the "On Your Own" problems.
  • 0:35–1:15Part B — Vector Walk. Each team runs 3 walking courses on the gym floor (below), measuring the real resultant and comparing it to their prediction.
  • 1:15–1:30Part C — Excel set-up. Enter your data into the template and confirm your vector calculator reproduces one hand-calculated answer before you leave.

Part A — Problem set

Show a sketch, components, and quadrant correction for each. Problems marked ★ are worked with the instructor.

#TaskGiven
1★x- and y-components350 N at 70°
2x- and y-components6 m/s at 240°
3★Magnitude and directionFx = 130 N, Fy = 1200 N
4Magnitude and directionAx = −5 m/s², Ay = −9 m/s²
5Magnitude and directionVx = −4 m/s, Vy = 12 m/s
6★Add graphically and analyticallyA = 50 N at 27°, B = 70 N at 145°
7Add graphically and analyticallyA = 120 m at 300°, B = 65 m at 200°
8Add graphically and analyticallyA = 15 m/s at 160°, B = 21 m/s at 220°

Part B — The Vector Walk

Mark a start point with tape and define +x (e.g., toward the far wall) and +y (90° CCW from it). For each course, the Walker walks each leg in a straight line; the Navigator sets the heading with the protractor at the start of each leg.

CourseLeg 1Leg 2Leg 3
18 m at 0°6 m at 90°—
210 m at 30°7 m at 135°—
3 (team design)Design your own 3-leg course with at least one leg in Quadrant III or IV.
  1. Predict: before walking, the Checker calculates the resultant magnitude and direction from the planned legs.
  2. Walk: the Walker completes the legs; tape the finish point.
  3. Measure: tape-measure the straight-line distance from start to finish (|R|) and measure the angle from +x with the protractor (θ). Also measure the finish point's x and y coordinates.
  4. Record predicted and measured values in the data sheet. Rotate roles and repeat each course with a new Walker (aim for 2 trials per course).

SafetyKeep walking lanes clear, walk (do not run), and watch for other teams' tape lines.

Lab Report ≈ 90 min

Backup data setAbsent, or your trial failed? Use this simulated data set. It has the same columns as the lab data sheet, so every formula below works unchanged. Tell your instructor in your report that you used it.
⬇ Vector Walk, 3 courses × 2 trials

Submit one Excel workbook (.xlsx) and one Word/PDF document with your figures and discussion answers. Work individually unless your instructor says otherwise; your raw data are shared within your team.

Step 1 — Build a vector calculator sheet ≈ 25 min

ColHeaderFormula (row 2)
AProblem / Vectortext
BMagnitudeinput
CAngle (deg)input
Dx-component=B2*COS(RADIANS(C2))
Ey-component=B2*SIN(RADIANS(C2))
FΣX (resultant rows)=SUM(D2:D3)
GΣY=SUM(E2:E3)
H|R|=SQRT(F2^2+G2^2)
IθR (deg, 0–360)=MOD(DEGREES(ATAN2(F2,G2)),360)

Enter all 8 problems and confirm the sheet matches your hand work. Format to 2 decimal places and include units in headers.

Step 2 — Vector-walk analysis ≈ 25 min

  • Calculate predicted |R| and θ for each course using your calculator sheet.
  • Compute measurement error: Error (m) = Measured |R| − Predicted |R| and % error = Error / Predicted × 100; repeat for angle (degrees).
  • Compute the mean and standard deviation of % error across trials with AVERAGE and STDEV.S.

Step 3 — Required visuals ≈ 15 min

  1. Figure 1. Tip-to-tail diagram for Problem 7 or 8 (hand sketch photo or Excel scatter with lines connecting (0,0) → A → A+B, and (0,0) → R).
  2. Figure 2. Vector walk map: an X–Y scatter showing the planned path and the measured finish points for all trials of Course 2 or 3. Equal axis scaling, labeled axes with units.
  3. Table 1. Predicted vs. measured resultant for each course with % error.
Excel tip — drawing vectorsPut the path coordinates in two columns (x then y), one row per point: (0,0), (Aₓ,A_y), (Aₓ+Bₓ, A_y+B_y). Insert → Scatter with Straight Lines and Markers. Add the resultant as a second series from (0,0) to the final point.

Step 4 — Discussion questions ≈ 25 min

  1. For Problems 4, 5, 7 and 8, state which quadrant the resultant falls in and show how you corrected the calculator's angle. Which problem would have been wrong if you trusted tan⁻¹ alone?
  2. Compare your predicted and measured vector-walk resultants. Was the error larger in magnitude or direction? Identify two specific sources of error and how you could reduce each.
  3. Did error grow with the number of legs in a course? Explain why errors in each leg accumulate in the resultant.
  4. A long jumper leaves the board at 9.5 m/s at 21°. Compute the horizontal and vertical components, and explain which component determines time in the air and which mostly determines distance.
  5. Give one example from human movement where two forces partially cancel (like Problem 6) and explain what the resultant means for the movement.

Submission checklist

  • Excel workbook: calculator sheet (8 problems), vector-walk sheet with error analysis, Figures 1–2.
  • Document: Table 1, Figures 1–2 with numbered captions, answers to Discussion Questions 1–5.
  • Units on every number and every axis.

Grading rubric (50 pts)

CriterionPtsFull credit looks like
Calculator sheet12All 8 problems correct, formulas (not typed numbers), correct quadrants
Vector-walk analysis10Predicted vs. measured, % error, mean ± SD
Figures & table10Titled, numbered, labeled axes with units, equal axis scaling
Discussion questions15Correct, uses data from this lab, explains the "why"
Professional presentation3Clear layout, consistent significant figures, spelling

References

  • Urone, P. P., & Hinrichs, R. (2022). College physics 2e. OpenStax. openstax.org (CC BY 4.0) Chapter 3 (vectors and two-dimensional kinematics).