For instructors and TAs

Instructor Guide

Design principles, equipment for each lab, what to set up on your campus, common student errors, and how to edit the manual.

Design principles

  • Section size: written for 16–20 students in groups of 3–4 with rotating roles (client, technician, recorder, safety monitor).
  • Time budget: 75-minute lab periods with a minute-level timeline; pre-lab about 45 minutes (25 reading, 20 quiz and discussion); notebook about 60 minutes with time boxes per step.
  • Instructor resources: answer keys, the pre-lab quiz bank (QTI for Canvas, Blackboard and D2L; GIFT for Moodle) and grading notes are free to verified instructors. Request them here. They are kept off the public site so students cannot find them.
  • Pre-labs follow the same structure every week, matching the Biomechanics lab manual: Pre-Lab Reading (numbered background sections, an interactive tool, and one research article with "read for" prompts), then the Pre-Lab Quiz (an 8-question checkpoint worth 2 pts and three discussion questions worth 1 pt each). Discussion question 3 always asks students to use the article. Quiz answer order is shuffled on each page load. The literature moves from a scientific statement (Week 1) through reviews, a meta-analysis and validation studies to a guided search in Week 9, where students find their own article.
  • Notebooks follow the syllabus point values: 15 points each, with a rubric on every lab page and five required discussion questions (Week 5 lists two more as extra credit).
  • Equipment-limited labs (Weeks 2, 5, 7, 11, 12) are scheduled as rotations so one or two units serve the whole section, and every lab has a backup data set or a lower-cost alternative (see the table below).
  • Metabolic testing (Weeks 7 and 11) is written for a VO₂-only portable analyzer such as the VO2 Master, with a full metabolic cart as an extension. GSSI University virtual labs are optional supplements.

Equipment and preparation

WeekEquipment (whole section)Prep before class
15 sphygmomanometers with small/regular/large cuffs, 5 stethoscopes (1 teaching), stopwatches, alcohol wipesCollect PAR-Q+; mark the stair route
22–4 treadmills, HR straps, BP kitsCheck treadmill grade calibration and emergency stops
36 skinfold calipers, Gulick tapes, skin markers, stadiometer, scaleZero-check calipers; privacy screen
4Vertec, 40 cm bench, 2 grip dynamometers, treadmill (8 mph, 20%)Measure bench height; confirm treadmill reaches 20%
5Lactate analyzer + control solution, 36+ strips, lancets, sharps, biohazard bag, 2 treadmills, HR monitors, RPE chartsRun QC; randomize slots; train one lactate technician
630 m hallway course with cones, 1.5-mile route, stopwatches, HR monitorsCheck weather and heat index; marshals for crossings
7VO₂-only analyzer or metabolic cart, masks, HR strap, treadmill (or cycle ergometer)Charge/warm up and calibrate; recruit 2 screened volunteers who ran Week 6
8Benches with safety bars, barbells, plates, collars, matsPost normative tables
9Y-balance kit, goniometers, sit-and-reach box, wall tapeSet up four stations; create the class spreadsheet
10Calibrated scale, urine reagent strips (with SG, pH, ketone, protein, microalbumin, creatinine pads), cups, gloves, water bottles, any exercise mode (rowers, treadmills, bikes, track)Check strip expiry; book a space where everyone can exercise for 40 min; check urine-collection policy
11VO₂-only analyzer or cart (hood if available), treadmill, mat or bed for supine restSchedule 2–3 fasted RMR volunteers before class
1212-lead ECG, 60+ electrodes, prep pads, razors, gowns, Polar H10Paper loaded; lead wires untangled and labelled

Local setup checklist

Everything in the manual is campus-neutral except the items below. Each is marked on its lab page with a 📍 Set up for your campus box.

WeekWhat to set up
AllPost each pre-lab as an assignment in your LMS; set due dates and point values to match your syllabus. Collect the PAR-Q+ (or your institution's screening form) before Week 1.
1Post a short BP demonstration video (yours, or one you choose) in your course site.
2, 4, 5Confirm treadmills reach the protocol speeds and grades (Week 4: 8 mph at 20%).
5Follow your institution's biosafety and sharps policy; some campuses require approval for capillary sampling in teaching labs.
6Measure a flat 1.5-mile course (400 m track: 6 laps + 14 m, or a mapped campus loop) and a 30 m hallway for the 6MWT. Arrange marshals.
7, 11Calibrate the analyzer; schedule volunteers (Week 11 RMR volunteers fasted, ideally before class). Optional: assign the GSSI University virtual labs as supplements.
8Post the two 1-RM prediction articles (or substitutes) in your course site.
10Choose an exercise mode the whole class can do at once; confirm the urine-collection policy and the private follow-up route for abnormal strip results.
PracticalDecide who acts as the client for the vital-signs station and set the room and timing.

Weekly notes

  • Week 2: about 25 minutes per participant, so two participants per treadmill. With one treadmill, run it as a demonstration plus one test per group.
  • Week 5: recovery samples at 3, 6, 10 and 15 min are spread across participants so the class builds one recovery curve with two strips per person.
  • Weeks 7 and 11: the backup data sets let students complete the notebook if a test fails; the GSSI modules work for remote or weather days.
  • Week 10: randomize pairs to water or no water so the class data form a simple two-group comparison. The 500 m row can be used as the exercise mode or as an optional extra (the rowing tool is on the Interactive Tools page).
  • Neuromuscular review: a drawing assignment on the Lab Practical page, best placed in an exam-review week.

Common errors to watch for

  • ACSM running equation (Week 6): VO₂ = 0.2·S + 0.9·S·G + 3.5. Students often drop the 0.2 and 0.9.
  • Weeks 7 and 11: VO₂-only analyzers cannot give RER; students should not report fuel use unless CO₂ was measured.
  • Units (Week 4): 1 mph = 0.447 m/s, grade is a decimal, and force is mass × 9.81 m/s² in newtons. Joules and watts follow from there.
  • Skinfolds (Week 3): body density to 5 decimals and %BF to 2; rounding density early changes %BF noticeably.
  • Blood pressure: deflating faster than 3 mmHg/s tends to underestimate systolic and overestimate diastolic pressure.

How this manual was developed

The labs were adapted from Dr. Logan Moore's EXS 4111 Exercise Physiology Laboratory at Texas Wesleyan University. For this open edition, background readings, a research article each week, interactive tools, pre-lab quizzes, Excel formulas, figure specifications, 15-point rubrics and CSV data sheets were added, and campus-specific details were replaced with set-up instructions. The Lab Practical page gives practice problems with different numbers, so instructors can keep their own exam private.

See Adopt this course for downloading the manual and adding it to your LMS.

Equipment alternatives

Every lab runs with basic equipment; the enhanced column is what improves it if you have it.

WeekBasic (any program)EnhancedNo equipment at all
1–2Aneroid BP kit, stethoscope, stopwatch; cycle ergometer if no treadmillTeaching stethoscopes, automated BP for comparison, treadmillsKorotkoff trainer + exercise-response tool
3Plastic calipers, Gulick tape, scaleMetal calipers; BIA or DXA comparisonPractice data on the page
4Wall + chalk for jump, bench, grip dynamometer, RAST on a fieldVertec, 20%-grade treadmill, Wingate cycleAnaerobic power calculator
5One lactate analyzer, one treadmill or a trackTwo treadmills, HR strapsLactate curve tool (simulated class)
6Track or measured loop, stopwatchesHR straps or watchesField-test calculator
7HR straps + RPE (no gas analysis)VO₂-only analyzer; metabolic cart for RERBackup GXT data + threshold tool
8Bench, barbell, matsPower rack, linear position transducer1-RM equation tool
9Tape-on-floor Y-balance, goniometer, sit-and-reach boxY-balance kit, digital inclinometerY-balance + correlation tool
10Scale, urine strips or a urine color chart, any exercise modeRefractometer, environmental chamber, sweat patchesBackup hydration data + calculator
11HR-based activity estimatesVO₂-only analyzer; cart with ventilated hoodBackup RMR and activity data
123- or 5-lead monitor, chest strap12-lead ECGPlacement trainer + ECG paper tool

Standards map

Each lab maps to the job tasks in Domain I (Health and Fitness Assessment) of the ACSM Certified Exercise Physiologist (ACSM-EP) exam content outline, and most also touch Domain IV (Risk Management and Professional Responsibilities). Check the current outline on acsm.org before mapping your syllabus.

WeekACSM-EP Domain I job taskAlso relevant
1–2I.A preparticipation screening · I.B client readiness · I.D cardiorespiratory assessment (exercise BP/HR)IV emergency procedures and stop criteria
3I.F anthropometric and body composition assessmentIII communicating results
4I.E muscular fitness (power) · I.C selecting assessmentsNSCA testing & evaluation
5I.D cardiorespiratory/metabolic assessmentIV infection control
6–7I.C selecting · I.D conducting and interpreting cardiorespiratory assessments (field and measured VO₂max)II prescription from thresholds and HR zones
8I.E muscular strength and enduranceII resistance-training loads
9I.E flexibility and neuromotor (balance) assessment—
10I.B readiness (hydration status)II fluid guidance; IV heat illness and privacy
11I.F body composition (FFM) · energy expenditureII/III energy balance and nutrition referral
12I.D cardiorespiratory assessment (ECG, HR monitoring)IV emergency procedures

Editing this OER

  • Each page is a plain HTML file; open it in any text editor. Navigation, the footer, quizzes, CSV downloads and all interactive tools are built by assets/oer.js.
  • Change the course name, author or institution in the SITE block at the top of assets/oer.js; the week list is in WEEKS.
  • To add a quiz question to a lab page, copy a <div class="q" data-answer="…"> block. The data-answer letter is the correct option's value.
  • To change a data sheet, edit the button's data-cols (column names separated by |) and data-prefill (rows separated by ;).
  • Text, data sheets and tools are CC BY-NC-SA 4.0 (free for non-commercial teaching; adaptations shared under the same license). Instructor resources (answer keys and quiz bank) are © Logan Moore and shared with verified instructors only. The M³ name and logo remain © Logan Moore.