Week 1 · Vital Signs

Measuring Blood Pressure & Heart Rate at Rest

Every exercise test starts and ends with vital signs. This week you learn to take heart rate and blood pressure accurately at rest, immediately after a short bout of exercise, and during recovery, so that next week you can take them while your client is moving.

Pre-lab ≈ 45 minIn-lab 75 minNotebook ≈ 60 minTools: sphygmomanometer, stethoscope, timer

Overview

Heart rate (HR) tells you how hard the heart is working; blood pressure (BP) tells you how much pressure the arteries are under as it works. Both are quick, cheap and non-invasive, and both are used to decide whether it is safe for a client to start, continue or stop exercising. The skill is in the technique: a poorly placed cuff or a rushed deflation can move a reading by 10 mmHg or more.

Learning objectives

  1. Palpate the radial and carotid pulse and calculate HR from a timed count.
  2. Take auscultatory BP with correct cuff size, arm position, inflation and deflation rate.
  3. Identify Korotkoff sounds K1 (systolic), K4 (muffling) and K5 (diastolic).
  4. Classify resting HR and BP using a published standard (AHA/ACC 2017) and state what each classification means for exercise testing.
  5. Describe the HR and BP response to a short bout of exercise and to the first 3 minutes of recovery.
  6. Report findings in an objective, de-identified clinical narrative (APA 7th edition).
ComponentWhat you doTime
Pre-lab readingBackground, interactive tool and one research article≈ 25 min
Pre-lab quiz (5 pts)8-question checkpoint (2 pts) and 3 discussion questions (3 pts)≈ 20 min
Lab activitySelf HR (carotid vs radial), resting vitals on 3 clients, one exercise bout + 3-minute recovery per person75 min
Lab notebook (15 pts)Figure 1 in Excel, one-paragraph APA clinical narrative≈ 60 min
Required before labSubmit the PAR-Q+ through your course site. You cannot be a client today without it.

Pre-Lab Reading ≈ 25 min

Every pre-lab has the same three parts: background reading, one article from the research literature, and the pre-lab quiz and discussion questions you submit before lab.

1. Heart rate

Each time the left ventricle ejects blood, a pressure wave travels along the arteries. Where an artery runs close to the skin over something firm, you can feel that wave as a pulse. The two sites we use are the radial artery (thumb side of the wrist, just inside the radius) and the carotid artery (beside the larynx, under the angle of the jaw).

  • Use the pads of your index and middle fingers, never your thumb (it has its own pulse).
  • Press the carotid gently and on one side only. Firm pressure can trigger the baroreceptor reflex and slow the heart, which gives you a falsely low reading and can make the client light-headed.
  • At rest, count for 30 s and multiply by 2. Immediately after exercise, count for 15 s and multiply by 4, because HR starts falling within seconds of stopping.
  • Start the count at zero on the first beat you feel when the timer starts.

Adult resting HR is usually 60–100 bpm. Values below 60 bpm (bradycardia) are common and healthy in trained people because their larger stroke volume needs fewer beats. A resting HR above 100 bpm (tachycardia) may reflect anxiety, caffeine, dehydration, illness or poor fitness, and is worth re-checking after more rest.

2. Blood pressure and the Korotkoff sounds

Systolic BP (SBP) is the peak arterial pressure during ventricular contraction; diastolic BP (DBP) is the lowest pressure, during relaxation. With the auscultatory method you inflate a cuff until the brachial artery is squeezed shut, then let the pressure fall slowly while listening below the cuff. As the cuff pressure drops below systolic, blood spurts through the partly open artery in turbulent bursts, and you hear tapping. These are the Korotkoff sounds:

PhaseWhat you hearWhat you record
K1First clear, repetitive tapping (at least two in a row)Systolic BP
K2–K3Swishing, then crisper and louder tapping—
K4Sudden muffling, softer and blowingRecord as well during exercise, or if sounds go all the way to 0
K5Sounds disappearDiastolic BP (adults at rest)

Deflate at 2–3 mmHg per second. The needle only "samples" the artery once per heartbeat, so deflating faster means fewer beats between SBP and DBP and a coarser reading. Try it in the trainer below: set the deflation rate to 6 mmHg/s and a heart rate of 55 bpm, and look at the resolution it reports.

Interactive: Korotkoff sound trainer

Each "new client" has a hidden blood pressure. Inflate, listen (turn your sound on, or watch the yellow stethoscope flash), and mark the first tapping and the point where it disappears. Readings are rounded to the nearest even number, as on a real gauge.

3. Technique checklist

  1. Prepare the client. Seated quietly for at least 5 minutes, back supported, feet flat, legs uncrossed, no talking. Ideally no caffeine, exercise or nicotine in the previous 30 minutes.
  2. Choose the cuff. The bladder should go around about 80% of the arm. A cuff that is too small reads falsely high; too large reads falsely low.
  3. Position the arm. Bare upper arm, supported and slightly flexed, with the cuff at heart level. Centre the bladder over the brachial artery, lower edge about 2–3 cm above the antecubital fossa.
  4. Place the stethoscope (bell or diaphragm) firmly over the brachial artery just below the cuff, not tucked underneath it.
  5. Inflate quickly to about 180 mmHg, or 20 mmHg above the expected SBP (30 mmHg above the point where the radial pulse disappears).
  6. Deflate at 2–3 mmHg/s, noting K1, K4 and K5. Continue about 10 mmHg past K5, then release fully.
  7. Record immediately to the nearest even number, as SBP/DBP mmHg, with arm and position.
  8. Repeat after at least 1 minute and average the two readings. If they differ by more than 5 mmHg, take a third.

4. Classifying resting blood pressure (AHA/ACC 2017; unchanged in the 2025 guideline)

CategorySystolic (mmHg)Diastolic (mmHg)
Normal< 120and< 80
Elevated120–129and< 80
Stage 1 hypertension130–139or80–89
Stage 2 hypertension≥ 140or≥ 90

The client is classified by whichever number (systolic or diastolic) falls in the higher category. A resting BP above 200/110 mmHg is a relative contraindication to exercise testing; do not exercise the client and tell your instructor.

📍 Set up for your campusRecord (or link) a short blood pressure demonstration video and post it in your course site. Any clear demonstration of seated auscultatory BP with the steps above works.

5. Watch before lab

Watch these before you try the trainer again. Turn your sound on.

  • Your instructor's demonstration of seated blood pressure (posted in your course site).
  • Video 1: an audio-enhanced BP recording. You will report this reading in Discussion question 2.
  • Extra practice if the sounds were hard to hear: video 2, video 3 and video 4.

6. From the literature ≈ 15 min

Read this week

Muntner, P., Shimbo, D., Carey, R. M., Charleston, J. B., Gaillard, T., Misra, S., Myers, M. G., Ogedegbe, G., Schwartz, J. E., Townsend, R. R., Urbina, E. M., Viera, A. J., White, W. B., & Wright, J. T., Jr. (2019). Measurement of blood pressure in humans: A scientific statement from the American Heart Association. Hypertension, 73(5), e35–e66. doi.org/10.1161/HYP.0000000000000087

This is the professional standard behind the technique checklist above. It is long, so read only the parts listed.

Read for:

  1. The abstract.
  2. The sections on measuring BP in the office or clinic: preparing the patient, choosing the cuff, and auscultatory versus automated (oscillometric) devices.
  3. What white-coat and masked hypertension are, and why BP is also measured outside the clinic.

Before you come to lab

  • Wear short sleeves or a loose top so your upper arm can be bared.
  • Avoid caffeine, nicotine and exercise for 30 minutes before lab; you will be a client.
  • Submit the PAR-Q+ (or your program's screening form) before lab.
  • Bring a stethoscope if you have one.

Pre-Lab Quiz ≈ 20 min

Two parts, both due before lab (5 pts). Checkpoint (2 pts): eight questions on the background and the article; aim for 7 of 8 before you come to lab. Discussion (3 pts): three short written answers you submit to your course site.

Checkpoint

You count 17 radial beats in 15 seconds immediately after a set of burpees. What is the active HR?
A 15-second count is multiplied by 4: 17 × 4 = 68 bpm.
Which Korotkoff phase is recorded as diastolic pressure in an adult at rest?
K5 (silence) is resting DBP. K4 is also recorded during exercise, when sounds may continue down to 0 mmHg.
A cuff that is too small for the client's arm will make the reading:
A narrow bladder needs extra pressure to compress the artery, so both numbers read high.
A client's resting BP is 126/84 mmHg. The AHA/ACC classification is:
The systolic alone would be "elevated," but a diastolic of 80–89 is stage 1. Use the higher category.
Why should you press the carotid artery lightly and on only one side?
Carotid sinus baroreceptors respond to pressure by increasing vagal (parasympathetic) tone, lowering HR and possibly BP.
Deflating at 8 mmHg/s on a client with a HR of 60 bpm means each heartbeat is about ___ mmHg apart on the gauge.
At 1 beat per second the needle moves 8 mmHg between beats, so you could miss SBP by up to 8 mmHg.
According to the AHA scientific statement (Muntner et al., 2019), the reference standard for measuring BP outside the clinic is:
Ambulatory monitoring takes repeated readings through the day and night; home monitoring is the alternative when it is not available.
A client's BP is normal in the clinic but high at home and work. This is called:
Masked hypertension is missed by office readings alone, and the statement notes it carries a substantially higher cardiovascular risk.

Discussion questions (submit to your course site)

About 75–150 words each unless stated. Each answer is worth 1 point: correct physiology, specific to this lab, and in your own words. Cite the article (author, year) wherever you use it.

1. In your own words, list the steps for measuring resting blood pressure, from seating the client to recording the value. A numbered list is fine.

2. What was the blood pressure in video 1? At what cuff pressure did you hear K1, and at what pressure did the sounds disappear?

3. Muntner et al. (2019) note that automated oscillometric devices reduce human error. Name two errors from this week's reading that a technician must avoid with the auscultatory method, and give one reason an exercise physiologist still needs to be able to take BP by ear.

Lab Activity 75 min

Group organization

Groups of 4: Client, Technician (takes the measurement), Recorder, and Checker (second set of ears with a teaching stethoscope, or times the count). Rotate roles after every client.

Requirement: each student personally measures resting HR and resting BP on three other students (Client 1, 2 and 3). Readings on yourself do not count. Each student also completes one exercise bout as a client.

Equipment per group

  • Two aneroid sphygmomanometers with small, regular and large adult cuffs (with one kit per group, measure two clients instead of three)
  • Stethoscope (teaching/dual-head if available)
  • Stopwatch or phone timer
  • Chairs with back support; table for arm support
  • Alcohol wipes for earpieces and diaphragms
  • Printed or digital data sheet; completed PAR-Q+ for each client

Timeline

  • 0:00–0:08Equipment check (cuff sizing, earpieces angled forward, gauge reads 0). Confirm PAR-Q+ for every group member. Assign starting roles.
  • 0:08–0:15Part A — Your own HR. Three 30-s counts at the carotid and three at the radial site.
  • 0:15–0:40Part B — Resting vitals rotation. HR ×2 and BP ×2 on Client 1, 2 and 3 (≈ 8 min per client). Clients sit quietly for 5 min before BP; start the next client's rest while you measure the current one.
  • 0:40–1:05Part C — Exercise and recovery. Each member completes one bout while the others record active HR, post-exercise BP, and 3-minute recovery HR and BP (≈ 6 min per client).
  • 1:05–1:12Check data for completeness and plausibility; repeat any rushed or outlying reading. Instructor initials your data sheet.
  • 1:12–1:15Disinfect earpieces, diaphragms and cuffs; return equipment.

Part A — Heart rate (yourself)

  1. Find your radial pulse; when the timer starts, count for 30 s and multiply by 2. Repeat 3 times.
  2. Find your carotid pulse (one side, light pressure) and repeat 3 times.

Part B — Resting HR and BP (Clients 1–3)

  1. Client seated for at least 5 min. Take two 30-s radial HR counts.
  2. Take two BP readings on the same arm, at least 1 min apart, following the technique checklist. Record the arm used.
  3. Average the two HR and the two BP readings.

Part C — Active and recovery response

Two technicians are needed: one for the pulse and one for BP. A third member times the bout and recovery and records.

  1. Confirm the PAR-Q+ and record a seated resting HR and BP. Do not proceed if resting BP exceeds 200/110 mmHg or the client reports any symptom; tell the instructor.
  2. The client performs one bout as quickly as can be safely managed: (a) 10 burpees, or (b) the assigned flight of stairs, up and back down, twice. Record which mode.
  3. Within 5 s of finishing, count the pulse for 15 s × 4 = active HR.
  4. The second technician takes BP immediately, finishing within 2 min of the end of the bout (post-exercise BP).
  5. The client sits. At exactly 3 min post-exercise, count HR for 30 s × 2 and take recovery BP.
  6. The next bout starts only when the client is within about 10 bpm of resting HR.
Stop and notify the instructor ifthe client reports chest discomfort, light-headedness, dizziness, unusual shortness of breath, nausea or any other sign of distress.

Lab Notebook ≈ 60 min · due at the start of next lab

Step 1 — Organize your data in Excel ≈ 10 min

  • Enter both data sheets. Average trials with =AVERAGE(D2:E2) and round BP to an even number with =MROUND(G2,2).
  • Compare carotid vs radial for yourself: mean difference =AVERAGE(carotid)-AVERAGE(radial).
  • Classify each client with a nested formula, for example (SBP in B2, DBP in C2):
    =IF(OR(B2>=140,C2>=90),"Stage 2",IF(OR(B2>=130,C2>=80),"Stage 1",IF(B2>=120,"Elevated","Normal")))

Step 2 — Figure 1 ≈ 20 min

  • Plot SBP, DBP and HR for yourself and Clients 1–3 at rest, immediately post-exercise and at 3-minute recovery (clustered column or line chart).
  • Put HR on a secondary y-axis; label both axes with units (mmHg, bpm).
  • Add labelled horizontal reference lines at 120 mmHg (upper limit of normal SBP), 130 mmHg (stage 1) and 140 mmHg (stage 2). The 80 and 90 mmHg diastolic lines are encouraged if the figure stays readable.
  • APA format: Figure 1 in bold, an italic title below it, a legend, and a Note. citing the source of the thresholds.
Excel tip — reference linesAdd a new series whose value is 120 in every row, change its chart type to a line, and remove its markers. Repeat for 130 and 140. Right-click → Add Data Labels on the last point to label each line.

Step 3 — Clinical narrative ≈ 30 min

Answer the questions below in one paragraph of 400–600 words, APA 7th edition (title page, double-spaced, 12-pt Times New Roman or 11-pt Calibri, 1-inch margins). Write in the third person and past tense, report every value with units, refer to people only as Client 1–3, cite your classification standard in text and on a reference page, and refer to Figure 1 at least once. Do not number answers or restate the questions.

  1. Did your carotid pulse match your radial pulse? If not, why might that be?
  2. What are your resting HR and BP classifications, and what do they imply for health?
  3. Were HR and BP similar between the group members you measured, and between technicians? Why or why not?
  4. What happened to HR, SBP and DBP immediately after the bout? Explain the mechanisms (sympathetic drive, cardiac output, peripheral resistance).
  5. Had each client's HR returned to rest by 3 minutes? What does recovery speed suggest about fitness and parasympathetic reactivation?
  6. If your group used different modes (burpees vs stairs), how did responses compare, and why?
  7. Using Figure 1, what BP classification was each client at rest, and what would that mean for exercise testing and prescription?
  8. Name one source of measurement error, and state whether you feel confident taking vitals.

Submission checklist

  • Instructor-initialled data sheet (photo or scan) and Excel workbook.
  • Word or PDF document: APA title page, the paragraph, Figure 1, reference page.

Grading rubric (15 pts)

CriterionPtsFull credit looks like
Data completeness3All required measurements on 3 clients plus yourself, averaged correctly, initialled
Figure 14HR, SBP, DBP across rest, post and recovery; secondary axis; 3 labelled thresholds; APA figure format
Narrative content6Every question addressed with values and units; correct classifications; sound physiological explanation
Clinical writing & APA2One paragraph, third person, de-identified, cited standard and reference page