Week 7 · Linear Kinetics

Impulse & Momentum: Vertical and Broad Jumps

Six jump conditions, one slow-motion phone, and the impulse–momentum relationship: how much push, for how long, and what it buys you.

Pre-lab ≈ 30 minIn-lab 90 minReport ≈ 90 minTools: slow-motion video (120–240 fps), tape, scale, Excel

Overview

Impulse–momentum is Newton's second law rewritten to make time explicit: F̄·Δt = m·v_f − m·v_i. Every jump is an impulse problem: the ground pushes on you for a short time, and the momentum you leave the ground with determines how high or how far you go. You will compare three vertical jumps and three broad jumps that differ in technique, estimate the impulse, force and power behind each, and explain why technique changes performance.

Learning objectives

  1. Define momentum and impulse and state the impulse–momentum relationship.
  2. Measure flight time and contact time from slow-motion video.
  3. Calculate takeoff velocity, momentum, impulse, average net force, average GRF and average power.
  4. Compare static, countermovement and approach conditions and explain the force–time trade-off.
  5. Identify limitations of video-based estimates compared with force plates.
  6. Apply conservation of momentum to elastic and inelastic collisions (pre-lab Goal-Line Collision demo).
ComponentWhat you doTime
Pre-labMomentum, impulse, the force–time curve, jump calculations, collisions (Goal-Line Collision demo); quiz25–30 min
Lab activitySix jump conditions per student, filmed at 120–240 fps; distances measured90 min
Lab reportCondition comparison tables, three figures, discussion (written or 2-min video)≈ 90 min

Pre-Lab Reading ≈ 15 min

1. Momentum and impulse

Momentum (p = m·v, kg·m/s) is the "quantity of motion"; it depends on both mass and velocity. Impulse (J = F̄·Δt, N·s) is force applied over time — the area under a force–time curve. Impulse causes a change in momentum:

p = m·vLinear momentum (kg·m/s)
J = F̄·ΔtImpulse (N·s) = area under the force–time curve
F̄·Δt = m·v_f − m·v_iImpulse–momentum relationship
F̄_net = J / ΔtAverage net force during contact
F̄_GRF = F̄_net + m·gAverage vertical ground reaction force (body weight must be overcome first)
P̄ = F̄_GRF · v̄Average power; v̄ ≈ (v_i + v_to)/2 during propulsion

You can increase impulse by pushing harder, by pushing longer, or both. That is the force–time trade-off: a deeper countermovement gives more time to apply force, but takes longer; a quick, stiff push gives less time but can produce higher forces.

2. Getting velocity from flight time

If the jumper takes off and lands in the same body position, flight is symmetric: time up = time down = t_flight/2. At the peak vertical velocity is zero, so:

v_to = g·t_flight / 2Vertical takeoff velocity
h = v_to² / 2g = g·t_flight² / 8Jump height (rise of the COM after takeoff)
v_x ≈ d_broad / t_flightAverage horizontal velocity in a broad jump
Worked exampleA 75 kg student has a CMJ flight time of 0.55 s and a propulsive contact time (lowest point → toe-off) of 0.30 s.
v_to = 9.81 × 0.55 / 2 = 2.70 m/s · h = 9.81 × 0.55² / 8 = 0.371 m
p = 75 × 2.70 = 202 kg·m/s · J = 202 − 0 = 202 N·s · F̄_net = 202 / 0.30 = 674 N
F̄_GRF = 674 + 75 × 9.81 = 1410 N (≈ 1.9 × body weight) · P̄ = 1410 × 2.70/2 ≈ 1900 W

Interactive: Jump impulse calculator

Hold flight time constant and change contact time. What happens to the force needed? This is the force–time trade-off.

3. The six conditions

Vertical jumpBroad (standing long) jump
1Static (squat) jump: hold a squat 2 s, jump without dipping, hands on hipsStatic: hold a squat, jump forward with no dip or arm swing
2Countermovement: quick dip and jump, hands on hipsSquat + arm swing: countermovement with full arm swing
32 m approach: two-step approach over 2 m, then jump vertically2 m approach: run-up over 2 m, take off from one or two feet

Expect performance to rise from condition 1 to 3. The countermovement uses the stretch-shortening cycle and gives more time to build force; the approach adds initial momentum (v_i ≠ 0) that the jumper redirects.

4. Initial velocity for each condition

  • Static: v_i = 0 (no movement before propulsion).
  • CMJ (vertical): analyze propulsion from the lowest point, where vertical v = 0, so v_i = 0 and Δt = lowest point → toe-off.
  • Approach broad jump (horizontal): v_i ≈ approach velocity = 2 m / approach time.

5. Collisions: momentum is conserved, kinetic energy usually is not

When two bodies collide, the forces they exert on each other are equal and opposite (Newton's third law) and act for the same time. Their impulses are therefore equal and opposite, and the total momentum of the pair is conserved:

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂Conservation of momentum (u = before, v = after)
v = (m₁u₁ + m₂u₂)/(m₁ + m₂)Perfectly inelastic: bodies stick together (a wrap-up tackle); the most KE is lost
e = (v₂ − v₁)/(u₁ − u₂)Coefficient of restitution: 1 = elastic (KE conserved), 0 = perfectly inelastic

Human collisions are nearly inelastic because tissue, pads and joints deform and absorb energy. Contact time still matters: the same impulse spread over a longer Δt means a smaller average force. That is the job of pads, helmets and "giving" with a hit.

Pre-lab exploration (≈ 5 min): Goal-Line CollisionOpen the Goal-Line Collision demo and load Head-on: typical RB vs. LB. Predict the common final velocity, then run the play. Switch to Elastic and run it again. Note what happened to total momentum and to total KE in each case. You will use this for Quiz Question 8.
Optional: landings are impulse problems tooIn the Ski Jumper demo, try "Try this" #4. The same 19 m flight lands with an equivalent fall height of ≈ 12 m on flat ground but ≈ 1.7 m on a 30° hill. What does that mean for the impulse the legs must absorb, and for the landing force?
Limitations to keep in mindVideo gives average forces only; a force plate measures the whole force–time curve. Flight-time methods assume identical takeoff and landing posture — tucking the legs inflates flight time and "jump height". Contact-time errors of one or two frames are a large fraction of a 0.25 s push.

Pre-Lab Quiz ≈ 10 min

Impulse is represented graphically by:
J = ∫F dt, the area under force–time. The slope of velocity–time is acceleration.
A jumper's flight time is 0.60 s. Their takeoff velocity is:
v_to = g·t/2 = 9.81 × 0.60 / 2 = 2.94 m/s.
Using the same flight time (0.60 s), jump height is:
h = g t²/8 = 9.81 × 0.36 / 8 = 0.44 m.
Two athletes reach the same takeoff velocity. Athlete A pushes for 0.40 s and Athlete B for 0.20 s (same mass). Compared with A, B's average net force is:
Same Δp means same impulse. Halving Δt requires doubling F̄.
Why do we add m·g to the net force to get the average vertical GRF?
ΣF = GRF − mg = m·a, so GRF = m·a + mg = F_net + mg.
Catching a ball "softly" by drawing your hands back reduces the force on your hands because it:
The momentum change is fixed; spreading it over a longer Δt lowers the average force. Landing from a jump with bent knees works the same way.
Which condition is expected to produce the greatest vertical jump height for most people?
An approach lets the jumper convert horizontal momentum and use a stronger stretch-shortening action into a greater vertical impulse.
A 95 kg running back at +6.5 m/s collides head-on with a 110 kg linebacker at −4.5 m/s and they move together. In the Goal-Line Collision, what happens to total momentum and total kinetic energy?
Momentum is always conserved in the collision (v = 123/205 = 0.60 m/s). In a perfectly inelastic collision most kinetic energy (≈ 99% here) becomes deformation, heat and sound. Only in an elastic collision (e = 1) is KE also conserved.

Short responses (submit to your LMS)

1. Explain the force–time trade-off using the countermovement jump vs. the static jump as your example.

2. Give one sport example where athletes try to maximize impulse and one where they try to minimize the peak force of a fixed impulse.

Lab Activity 90 min

Group organization

4 teams of 5. Each team runs two stations side by side: a vertical-jump station and a broad-jump station. Roles: Jumper, Video operator (slow-motion, side view, whole body + floor), Distance measurer, Approach timer, Recorder.

Equipment per team

  • Two phones with slow-motion (120–240 fps) on tripods
  • Scale; tape measure; floor tape for takeoff line and 2 m approach mark
  • Wall tape measure or chalk for vertical reach (optional check)
  • Stopwatch for approach time
SafetyNon-slip surface, clear landing zone for broad jumps (≥ 4 m), 5-minute warm-up with submaximal jumps. Stop if you feel pain.

Timeline

  • 0:00–0:10Briefing; how to read flight time and contact time by counting frames (Δt = frames ÷ fps).
  • 0:10–0:18Measure body mass and standing waist (greater trochanter) height; warm-up.
  • 0:18–0:55Jumps: each student does 1 valid trial of each of the 6 conditions (repeat a trial only if it was invalid). Half the team starts at each station, then they switch.
  • 0:55–1:25Video extraction: each student frame-counts flight time and contact time for their own six jumps (≈ 4–5 min per jump) and enters them in the team sheet.
  • 1:25–1:30Upload team data sheet.

What to measure

  1. Body mass (kg) and waist-to-floor height (m).
  2. Flight time: frame of toe-off to frame of first ground contact.
  3. Propulsive contact time: static — first upward movement → toe-off; CMJ — lowest point → toe-off; approach — final foot plant → toe-off.
  4. Distance: broad jump — takeoff line to the rear-most heel; vertical — optional reach height minus standing reach.
  5. Approach time over the 2 m approach (approach conditions only).

Lab Report ≈ 90 min

Backup data setAbsent, or your trial failed? Use this simulated data set. It has the same columns as the lab data sheet, so every formula below works unchanged. Tell your instructor in your report that you used it.
⬇ 5 jumpers × 6 conditions, 240 fps

Step 1 — Calculations for every condition ≈ 25 min

Columns A–N are the team data sheet (B mass, D jump type, E condition, G fps, H–I frame counts, L broad distance, M approach time). One formula per column works for both jump types:

ColHeaderFormula (row 2, fill down)
JFlight time (s)=H2/G2
KContact time (s)=I2/G2
OPerformance (m): height or distance=IF(D2="Vertical",9.81*J2^2/8,L2)
PInitial velocity v_i (m/s)=IF(AND(D2="Broad",E2="Approach"),2/M2,0)
QTakeoff velocity v_f (m/s)=IF(D2="Vertical",9.81*J2/2,L2/J2)
RMomentum p (kg·m/s)=B2*Q2
SAverage acceleration (m/s²)=(Q2-P2)/K2
TImpulse J (N·s)=B2*(Q2-P2)
UAverage net force (N)=T2/K2
VAverage GRF (N)=IF(D2="Vertical",U2+B2*9.81,U2)
WAverage power (W)=V2*(P2+Q2)/2
XGRF ÷ body weight=V2/(B2*9.81)
YPower ÷ mass (W/kg)=W2/B2

The original lab handout listed a simplified power formula (force/time). Power is the rate of doing work, which equals force × velocity; use the version above.

Step 2 — Tables and graphs ≈ 20 min

  1. Table 1. Your six conditions: performance, v_f, p, J, F̄_net, F̄_GRF, P̄.
  2. Table 2. Team means ± SD by condition (AVERAGEIFS, STDEV.S).
  3. Figures 1–2 (required). Scatter plots of Impulse and Power (x-axis) vs. Performance (y-axis) for all team trials, vertical and broad as separate series, each with a linear trendline and R².
  4. Figure 3 (required). Column chart of mean jump height by condition with SD error bars (broad distance on a second chart is optional).
  5. Optional: the same scatter plots for average force and momentum.

Step 3 — Discussion (written or 2-minute video) ≈ 35 min

Answer the five required questions either in writing or in a 2-minute recorded video (phone or Zoom) with at least one of your graphs on screen. You don't need to do both.

Answer the five required questions. Optional questions earn up to +3 extra-credit points.

  1. Which variable (force, momentum, impulse or power) had the strongest relationship with performance (highest R²)? Explain why physically, using the impulse–momentum relationship.
  2. Describe how technique (static → countermovement/arm swing → approach) changed contact time, average force and impulse.
  3. Using your own data, describe a force–time trade-off you observed. Was the longest contact time also the best jump?
  4. Compare your average GRF to typical force-plate values for jumping (≈ 2–3 × body weight peak). Why are video-based average forces lower than peak forces?
  5. Coaching implications: give two cues or training methods to improve jump impulse, and explain the mechanics behind each.

Optional questions (extra credit)

  1. Why does an approach help a broad jump more than (or less than) it helps a vertical jump? Consider initial momentum direction.
  2. List three limitations of this lab and how a force plate would address each.
  3. Collisions: in the Goal-Line Collision, run one play as inelastic and again as elastic. Report the impulse on each player and the KE lost in each case. Then change only the contact time from 0.10 s to 0.40 s and explain what changes and what doesn't. Relate this to the force–time trade-off you saw in your jumps.

Step 4 — Final check ≈ 5 min

Confirm units on every column and axis, and that your Table 1 values match the figures.

Submission checklist

  • Excel workbook: calculations, Tables 1–2, Figures 1–3.
  • Document: tables, figures with captions, and either written discussion answers or a 2-minute video link.

Grading rubric (50 pts)

CriterionPtsFull credit looks like
Calculations12Correct v_i/v_f per condition, impulse, GRF, power, units
Tables & figures14Three required figures, trendlines and R², error bars
Discussion (written or video)24Mechanistic explanations grounded in data; video ≤ 2 min with a graph shown

References

  • Urone, P. P., & Hinrichs, R. (2022). College physics 2e. OpenStax. openstax.org (CC BY 4.0) Chapter 8 (linear momentum and collisions).
  • Linthorne, N. P. (2001). Analysis of standing vertical jumps using a force platform. American Journal of Physics, 69(11), 1198–1204. doi.org/10.1119/1.1397460